نویسندگان | Alireza Nakhaei,Majid Kalatebojdi,Faridbod Farnoush,Ganjali Mohammad Reza,Alizadeh Taher |
---|---|
نشریه | Research on Chemical Intermediates |
شماره صفحات | 1-18 |
شماره سریال | 7 |
شماره مجلد | 39 |
ضریب تاثیر (IF) | 1.369 |
نوع مقاله | Full Paper |
تاریخ انتشار | 2018 |
رتبه نشریه | ISI |
نوع نشریه | الکترونیکی |
کشور محل چاپ | هلند |
نمایه نشریه | JCR،Scopus |
چکیده مقاله
Ytterbium tungstate nanoparticles (YTNPs) were used as a sorbent for removing methylene blue (MB), as a model cationic dye, from water solutions. YTNPs were characterized through scanning electron microscopy. The factors influencing the efficiency of the sorbent in a batch adsorption procedure (i.e., initial pH, amount of YTNPs, and contact time) were evaluated at a constant concentration of MB, and central composite design was used to determine their efficacies. The results indicated the best conditions in the case of a 200-ppm MB solutions to be 3 mg mL-1 (as the amount of YTNPs used), pH = 10, and contact time = 30 min. The adsorption kinetics, isotherm and desorption properties of YTNPs were also fully investigated. The Langmuir model was used for fitting the adsorption isotherm and the results indicated a high adsorption capacity for the model dye. The adsorption kinetics was found to comply with a pseudo-second-order behavior, which means that adsorption constitutes the rate-determining step. Furthermore, YTNPs were successfully used to remove MB from water and wastewater samples.
tags: Removal; Cationic dye; Ytterbium tungstate nanoparticles; Experimental design; Isotherm; Kinetics