| نویسندگان | Fatemeh Nasiri,Jiro Takemura |
| نشریه | Bulletin of Engineering Geology and the Environment |
| شماره صفحات | 1-18 |
| شماره سریال | 81 |
| شماره مجلد | 1 |
| ضریب تاثیر (IF) | 1.901 |
| نوع مقاله | Full Paper |
| تاریخ انتشار | 2022 |
| رتبه نشریه | ISI |
| نوع نشریه | چاپی |
| کشور محل چاپ | بلژیک |
| نمایه نشریه | JCR،Scopus |
| کلید واژه ها | Pile stabilized slopes · Centrifuge modeling · Pseudo, static loading · Soil arching |
|---|
چکیده مقاله
Stabilizing piles are considered a prevailing and very effective method of reinforcing slopes. Considering the widespread
application of stabilizing piles, many recent studies are devoted to pile-stabilized soil slopes. However, investigation on
infinite slopes is very limited. In the present study, the stability of pile-stabilized infinite slopes was investigated by a series
of physical modeling under pseudo-static loading, through a beam-type geotechnical centrifuge machine. A tilting table was
used to apply pseudo-static loading on the slope models under a constant centrifugal acceleration of 45 g. The models were
instrumented using miniature pressure cells, potentiometers, and monitoring cameras. The results of this study confirmed
the development of stress arches behind the stabilizing piles. Based on the experimental data, it was concluded that the slope
angle has an inverse power relation with the pile spacing. For the material used in this study, a pile spacing of 6.7 times the
pile diameter was appropriate for doubling the stable slope angle. Since the results of this study are limited to a specific soil
and test conditions, further investigation including numerical modeling is recommended.
لینک ثابت مقاله