۱ | A new Approach for Chatter Prediction in Robotic milling Based on Signal Processing in Time domain | Saeed Rahnama | Applied Mechanics and Materials | 2013 |
۲ | An investigation on micro-hardness, micro-structure and ductility of clad layer in copper clad aluminum wire under multi stage–NCWD | Saeed Rahnama,Fariborz Fatehi Sichani,Mehdi Raghebi,Christof Sommitsch | Materials Research Express | 2020 |
۳ | Experimental and numerical study of optimum functionally graded Aluminum/GFRP adhesive lap shear joints using Epoxy/CTBN | Saeed Rahnama | International Journal of Adhesion and Adhesives | 2021 |
۴ | Experimental investigation on the mechanical behavior of hybrid bonded (rivet/adhesive) tubular lap joint (composite to metal) under pure torsion | Saeed Rahnama,Mahmood Farhadi Nia | Journal of Adhesion Science and Technology | 2020 |
۵ | Experimental study of the CTBN effect on mechanical properties and mode I and II fracture toughness of a new epoxy resin | Saeed Rahnama,Abbas Zolfaghari | Journal of Adhesion Science and Technology | 2020 |
۶ | Experimental study on the effect of hygrothermal environments combinedwith the sustained mechanical loads on the strength of composite rings | Saeed Rahnama,Roham Rafiee | Composite Structures | 2021 |
۷ | Numerical Analysis of Delamination Buckling in Composite Cylindrical Shell under Uniform External Pressure Cohesive Element Method | Saeed Rahnama,Lotfi Mohamad,Nosouhi Reza | Journal of Modern Processes in Manufacturing and Production | 2017 |
۸ | Special criterion for crack path prediction at micro-structural scale based on dominate slip system and grain boundary | Saeed Rahnama, | International Journal of Fatigue | 2014 |
۹ | Super dewetting surfaces Focusing on their design and fabrication methods | Saeed Rahnama,Naser Valipour Motlagh,Rouhollah Khani | Colloids and Surfaces A: Physicochemical and Engineering Aspects | 2015 |
۱۰ | The influence of hygrothermal environments on the stress concentration in unidirectional composite lamina | Saeed Rahnama,Rafiee Roham | Mechanics of Materials | 2019 |
۱۱ | Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint | Saeed Rahnama,Mahmood Farhadi Nia | Journal of Applied and Computational Mechanics | 2022 |
۱۲ | بررسی اثر پارامترها بر فشار بین لایه ای طی فرآیند کشش مفتول مرکب مس- آلومینیوم | سعید رهنما,فریبرز فاتحی سیچانی,مهدی راغبی | مهندسی مکانیک مدرس | 2016 |
۱۳ | بررسی اثر جدایش لایه در پاسخ ستونهای ساندویچی تقویت شده با الیاف کامپوزیتی | سعید رهنما,رضا سرایلو | مهندسی مکانیک دانشگاه تبریز | 2020 |
۱۴ | بررسی استحکام بین لایه ای مفتول دو لایه فولاد -فولاد ضدزنگ | سعید رهنما,فریبرز فاتحی سیچانی,شاه بیکی احسان | مهندسی مکانیک مدرس | 2019 |
۱۵ | بررسی تجربی تاثیر الگوی هدفمند عملیات سطحی لیزری بر استحکام اتصال چسبی آلومینیوم/کامپوزیت در مود اول شکست | سعید رهنما,امیر کریمان مقدم | مهندسی مکانیک مدرس | 2023 |
۱۶ | بررسی تجربی تاثیر عملیات سطحی مختلف بر رفتار شکست مود اول اتصال چسبی کامپوزیت - آلومینیوم | سعید رهنما,امیر کریمان مقدم | علوم و فناوری کامپوزیت | 2023 |
۱۷ | بررسی تجربی تغییرات ضخامت مقطع شکست نمونه نامتجانس )با درزجوش افقی( در آزمایش ضربه سقوطی فولاد API X65 | سعید رهنما,مصطفی تعظیمی,سیدحجت هاشمی | مهندسی مکانیک مدرس | 2020 |
۱۸ | بررسی تجربی عددی فشار بین لایه ای طی فرایند کشش مفتول دو لایه آلومینیوم با روکش مس | سعید رهنما,مهدی راغبی,فریبرز فاتحی سیچانی | مهندسی مکانیک مدرس | 2017 |
۱۹ | بررسی تجربی و عددی رشد ترک در اتصال چسبی دو صفحه کامپوزیتی در حالت مود 1 شکست | سعید رهنما,امیر کریمان مقدم,مالکی ستار | مهندسی مکانیک مدرس | 2016 |
۲۰ | بررسی تجربی ویژگیهای سطح شکست نمونه نامتجانس (با درز جوش افقی) آزمایش ضربه سقوطی فولاد API X65 | سعید رهنما,مصطفی تعظیمی,سیدحجت هاشمی | مکانیک سازه ها و شاره ها-Journal of Solid and Fluid Mechanics | 2020 |